Galaxy Tab S9 FE+ Repair

About this repair

The Galaxy Tab S9 FE+ (SM-X610/X616) stretches a 12.4-inch 2560x1600 PLS LCD across a 16:10 frame at 90Hz, and because that large panel is laminated to its Wacom S Pen digitizer we replace glass, LCD, and digitizer as one bonded unit, then retest pen tracking across all 12.4 inches. Like the smaller FE it is IP68 rated, so each reseal gets fresh perimeter adhesive once the frame is opened. The plus model's most common repairs are corner cracks on its oversized thin glass, a tired 10090mAh battery, and a worn USB-C charge board.

• Premium Aftermarket LCD Assembly
• OEM Service Pack (Genuine Samsung)

Is the S9 FE+ screen the same part as the smaller S9 FE?

No. The FE+ uses a larger 12.4-inch 2560x1600 panel, so its bonded glass, LCD, and digitizer assembly is a different part and is not interchangeable with the 10.9-inch S9 FE.

Does the FE+'s bigger battery make the repair take longer?

The FE+ carries a larger 10090mAh adhered battery, so we warm and lift it carefully to avoid flexing the 12.4-inch panel, but it stays a same-visit swap in most cases.

Will S Pen tilt and pressure still work after a screen repair?

Yes. The EMR digitizer that reads the included S Pen sits behind the FE+'s 12.4-inch LCD, and our replacement assembly restores full pressure and tilt sensing across the larger display.