Galaxy Tab S7+ Repair — North Providence RI

About this repair

The Tab S7+ drives a 12.4-inch 2800×1752 Super AMOLED at 120Hz over an optical in-display fingerprint reader, so a cracked screen needs a laser-bonded AMOLED assembly plus recalibration of that under-glass sensor to keep unlocking working. Its 10,090mAh battery is adhesive-mounted beside the quad AKG speakers, and we lift the cell with controlled heat to avoid puncturing a pack that has begun to swell. After any panel work we re-pair the 9ms-latency S Pen digitizer so writing stays lag-free from edge to edge.

• Aftermarket
• Premium

Is the Tab S7+ screen AMOLED, and does that change the repair?

Yes — the S7+ carries a 120Hz Super AMOLED, far brighter with deeper blacks than the S7 FE's LCD, and because it's laser-bonded over the fingerprint reader we fit it as a complete laminated assembly so the sensor and S Pen layer stay aligned.

Can the in-display fingerprint reader survive a Tab S7+ screen swap?

The S7+'s optical fingerprint sensor sits beneath the AMOLED, so after fitting the new panel we recalibrate it and re-test enrollment to confirm prints register before the tablet goes back to you.

Why is my Tab S7+ lifting or bulging at the display edge?

That's usually the 10,090mAh battery swelling and pushing the laminated AMOLED upward; we remove the adhesive-set cell with heat-controlled lifting and reseat the panel so the 120Hz display sits flush again.