Galaxy Tab S7 FE Repair — North Providence RI

About this repair

The Tab S7 FE pairs a 12.4-inch 2560×1600 TFT LCD at 60Hz with a 10,090mAh battery, and because its glass and display are laminated as one unit a cracked screen means swapping the full assembly to keep S Pen tracking accurate. Unlike the S7+, the S7 FE has no in-display fingerprint sensor, so a screen swap skips biometric recalibration but still demands careful reseating of the Wacom digitizer behind that wide 12.4-inch panel. We also rebuild USB-C charging boards and replace the adhesive-set battery, easing the cell out without flexing the slim aluminum chassis.

• Aftermarket
• Premium

Does the Tab S7 FE have an AMOLED screen like the S7+?

No — the Tab S7 FE uses a 12.4-inch TFT LCD locked at 60Hz, not the S7+'s 120Hz Super AMOLED, so its panel is a different laminated part that we stock and fit as one bonded assembly to preserve S Pen accuracy.

Will my S Pen still work after a Tab S7 FE screen replacement?

Yes — the S7 FE's S Pen reads off the Wacom digitizer bonded under the 12.4-inch glass, and we recalibrate pen tracking after the panel swap so pressure and hover respond correctly out to all four corners.

My Tab S7 FE won't charge — battery or port?

Often it's the USB-C charging board rather than the 10,090mAh battery; we bench-test both, and because the S7 FE supports 45W input we confirm the fast-charge handshake after a port repair so it isn't stuck trickling.