Galaxy Tab S6 Lite (2024) Repair — North Providence RI

About this repair

The 2024 Tab S6 Lite (SM-P620) keeps the 10.4-inch 2000×1200 PLS LCD but moves to the Exynos 1280, and its bundled EMR S Pen draws no power because a Wacom digitizer layer is fused beneath the glass — so a cracked panel that still lights up yet ignores pen strokes means that digitizer took the hit. We replace the bonded LCD-and-digitizer as one calibrated unit, then confirm pen pressure, tilt and palm rejection across all four corners. We also rebuild the worn USB-C charge board and swap the 7040 mAh battery when charging stalls or the back begins to bow.

• Aftermarket LCD Assembly
• OEM-Pull (Original) LCD

My S6 Lite screen still shows the picture but the S Pen won't write — can that be fixed?

Yes. On the 2024 Tab S6 Lite the S Pen is read by a Wacom EMR digitizer bonded under the 10.4-inch LCD, so a drop can crack that sensing layer while the image survives. Replacing the LCD-and-digitizer assembly restores pen tracking, and we recalibrate pressure and tilt before handing it back.

Does the 2024 model use the same screen as the older Tab S6 Lite?

Both are 10.4-inch 2000×1200 LCDs, but the 2024 SM-P620 refresh rebuilt the internals around the Exynos 1280, so we match the panel to your exact model number rather than assuming a 2020 or 2022 part will fit and register the S Pen.

It only charges when I hold the cable at an angle — port or battery?

On the Tab S6 Lite the USB-C connector sits on its own flex board, and after a couple of years of plugging it wears or bends, so we test that board first; we then check whether the 7040 mAh battery has swollen, since a puffed cell can push on the port and lift the back cover.