iPad Pro 9.7 Repair — North Providence RI

About this repair

The 9.7-inch iPad Pro pairs a 2048×1536 IPS panel that was the first Apple display with True Tone plus a P3 wide-color, anti-reflective laminated finish, so its cover glass, digitizer and LCD are fused into one bonded assembly we heat and separate with care. Because Touch ID on the home button is cryptographically paired to this model's A9X logic board, we always transfer your original button during a screen job — an aftermarket button cannot restore the fingerprint reader. We also handle swollen, adhesive-mounted batteries and the Apple Pencil (1st-gen) digitizer dead zones that creep in along the edges.

• Premium
• Aftermarket

Will Touch ID still work after an iPad Pro 9.7 screen repair?

Yes — we transfer your original home button, because Touch ID on the 9.7-inch iPad Pro is paired to its A9X board and cannot be restored with an aftermarket button.

My iPad Pro 9.7 glass is cracked but touch still works — can you replace just the glass?

On this model the cover glass, digitizer and LCD are fully laminated into one assembly, so the bonded unit is replaced together; the anti-reflective True Tone glass can't be reliably split from the panel beneath it.

The back of my iPad Pro 9.7 is bulging — is that a problem?

That's a swelling lithium battery lifting the laminated screen off the frame; we take it out of service and replace the adhesive-mounted cell before it warps the digitizer or cracks the panel.