iPad Pro 12.9 (5th Gen) Repair — North Providence RI

About this repair

The 2021 iPad Pro 12.9 (5th gen) was the first iPad to pair an Apple M1 chip with a 2,596-zone Liquid Retina XDR mini-LED panel, and that front glass is laser-bonded to the touch and backlight layers, so a shattered screen is replaced as one calibrated assembly. We also de-bond and rebuild its glued 40.88 Wh battery, a frequent swell point that bows this thin 5.9 mm chassis and lifts the display from the frame. Worn Thunderbolt / USB 4 charging ports get reflowed or swapped without disturbing the TrueDepth Face ID array, which stays married to your original board.

• Quantum+ Glass + Digitizer (original XDR panel re-laminated)
• QMAX Replacement Battery (40.88 Wh)

Can you replace just the cracked glass on a 5th-gen iPad Pro 12.9?

The 5th-gen's outer glass is laser-bonded to its mini-LED XDR panel, so a deep crack usually needs the full M1-era assembly; only a light surface crack over an intact 120Hz ProMotion touch layer can sometimes be re-glassed and re-laminated.

My 5th-gen iPad Pro 12.9 battery is swelling and pushing the screen up — can you fix it?

Yes. That glued 40.88 Wh cell expands and pries the XDR display off the 2021 chassis; we safely lift the panel, dissolve the adhesive, fit a fresh battery and re-seat everything so the tablet sits flat and the screen bonds tight again.

Will Face ID keep working after a 5th-gen iPad Pro screen repair?

It does, because the TrueDepth dot projector is serialized to your M1 logic board rather than to the glass; we carefully transfer the original Face ID flex during the swap so secure unlock and Apple Pay survive the repair.