Galaxy S9+ Repair · Same-Day · North Providence RI

About this repair

The Galaxy S9+ steps up from the S9 with a 6.2-inch curved Quad HD+ Super AMOLED and a second telephoto rear camera above its dual-aperture (f/1.5–f/2.4) main lens, so a back-glass or camera job means carrying over and re-pairing the fingerprint pad centered beneath that twin-camera stack. The panel is laminated to the chassis and returns as one OLED-with-frame unit on the G965, which clears the curved-edge ghost-touch and green line that follow a drop. Its glued 3500mAh cell is the routine swelling culprit, lifting the AMOLED off the frame, and we route around the AKG-tuned stereo speakers and iris scanner before re-bonding the IP68 gaskets.

• Genuine OLED Assembly w/ Frame
• Aftermarket Soft OLED w/ Frame

What's different about repairing an S9+ versus the regular S9?

The S9+ carries a larger 6.2-inch curved Quad HD+ panel and an extra telephoto camera, so its fingerprint pad sits below a dual-camera module instead of a single lens; we transfer that original pad onto the new OLED-with-frame unit and re-pair it so unlock keeps working on the G965.

Why does my S9+ screen lift at the curved edge or show a green line?

On the S9+ that lift is usually its glued 3500mAh battery swelling and shoving the laminated Super AMOLED off the frame, while the green stripe is a strained ribbon bond after a knock; we seat a fresh cell and fit a complete OLED-with-frame assembly to cure both.

Will the dual cameras and iris unlock still work after a back-glass repair?

Yes — the S9+'s bonded rear glass lifts under controlled heat while we shield the dual-aperture wide and telephoto lenses, then we carry the centered fingerprint pad onto the housing, re-pair it, and re-test the iris scanner before resealing for IP68.